Knotting guide · Friendship and Alpha bracelets

Friendship Bracelet Knots

Every friendship bracelet pattern is built from four basic knots: forward, backward, forward-backward and backward-forward. Each one is two half knots tied with one string around another. A forward or backward knot makes the two strings switch places; a forward-backward or backward-forward knot puts them back where they started. The knot always shows the color of the string doing the tying.

By MyBeadPattern · Updated

What you need

In the diagrams below, the coral string starts on the left and the teal string starts on the right.

The 4 knots at a glance

Read across a row to see which string ties, how many half knots you make and where the strings end up. The symbols follow the arrow convention explained in friendship-bracelets.net's knot guide.

KnotSymbolHow to tie itKnot colorStrings afterwards
Forward (FK)Left string ties two forward half knots on the right stringLeft stringSwitch places
Backward (BK)Right string ties two backward half knots on the left stringRight stringSwitch places
Forward-backward (FBK)Left string ties one forward half knot, then one backward half knotLeft stringBack where they started
Backward-forward (BFK)Right string ties one backward half knot, then one forward half knotRight stringBack where they started
Where the strings end up after each of the four knots Four panels. In each, a coral string enters on the left and a teal string on the right. After a forward knot the knot is coral and the strings have switched sides. After a backward knot the knot is teal and the strings have switched sides. After a forward-backward knot the knot is coral and the strings stay on their original sides. After a backward-forward knot the knot is teal and the strings stay on their original sides. Forward: switch Backward: switch Forward-backward: stay Backward-forward: stay
The knot takes the color of the string that ties it. Forward and backward knots swap the strings; the two mixed knots return them.

How to tie a forward knot

The forward knot moves the left string to the right. It is the knot you use most, and the one the classic candy stripe bracelet uses for every row. The left string is the working string; the right string is the holding string.

  1. Make a “4” shape

    Hold the right string straight and taut. Lay the left string over it so the two strings form the shape of a number 4.

  2. Go under and through

    Pass the end of the left string under the right string and up through the gap of the 4.

  3. Slide it up and tighten

    Keep the right string taut, slide the loop up to the top and pull it snug. That is one half knot. Repeat steps 1–3 once more to finish the forward knot.

Tying one forward half knot in three steps Step 1: the coral working string crosses over the straight teal holding string to make a 4 shape. Step 2: the coral end passes behind the teal string and comes up through the loop. Step 3: the loop is pulled up into a coral knot wrapped around the teal string, and the coral string now hangs to the right. 1 · Over, in a 4 shape 2 · Under, then up through 3 · Slide up, pull snug
One half knot. Tie the same half knot again on the same strings to complete a forward knot.

How to tie a backward knot

The backward knot is the mirror image: the right string ties onto the left string and moves to the left. Hold the left string taut, lay the right string over it in a reversed 4 (it looks like a “P”), pass the end under and up through the gap, then slide it up and tighten. Tie two of these half knots for one backward knot.

Tying one backward half knot in three steps A mirror image of the forward half knot. The teal working string on the right crosses over the straight coral holding string in a reversed 4 shape, passes behind it and up through the loop, and tightens into a teal knot. The teal string then hangs to the left. 1 · Over, in a reversed 4 2 · Under, then up through 3 · Slide up, pull snug
The same three moves as the forward knot, mirrored. The teal string now ties, so the knot is teal.

Forward-backward and backward-forward knots

These two knots change direction halfway through, so the working string ends on the same side it started. Patterns use them where a line of color turns around, such as the point of a sideways V.

A quick check: if your working string ended up on the opposite side, you tied two half knots in the same direction and made a forward or backward knot instead.

The two half knots of a forward-backward knot Left panel: after a forward half knot, the coral string has moved to the right of the teal string. Right panel: after a backward half knot on top, the coral string returns to the left, leaving a coral knot with both strings back on their starting sides. After the forward half After the backward half
The backward-forward knot is the same idea started from the right.

Reading knot symbols on a pattern

Normal (diagonal) friendship bracelet patterns draw each knot as a small circle with an arrow. As Masha Knots explains, the circle's color is the color of the finished knot. The arrow tells you which knot to tie:

Always check the key on the pattern you are using; some sites draw their symbols differently.

Which knots an Alpha bracelet uses

Alpha patterns are drawn as a grid instead of arrows, but they use the same forward and backward knots. Your Alpha chart sets the direction: on MyBeadPattern charts, row 1 travels left to right, row 2 right to left, and so on.

Which knot goes in each square of a small two-color Alpha chart A chart of 6 columns and 2 rows. Row 1 travels right: cream background squares are labeled FK and two coral squares in columns 3 and 4 are labeled BK. Row 2 travels left: cream squares are labeled BK and coral squares in columns 2 and 5 are labeled FK. Row 1 → Row 2 ← FK FK BK BK FK FK BK FK BK BK FK BK Cream = working string · Coral = base string ties
An original two-row example. The knot changes with the row direction and with the color of the square.

To practice the direction change, pick a two-color chart with few base strings, such as the Arrow repeat band (8 base strings) or the Narrow zigzag band (10 base strings).

Multicolor Alpha charts are often worked by switching which working string you tie with instead. The direction rule for each row stays the same. Starting the bracelet, changing colors and finishing are separate techniques.

Fix common knot mistakes

What you seeLikely causeWhat to do
The knot is the wrong colorThe holding string went slack, so the knot formed around the working string insteadUndo it and keep the holding string straight and taut while you tighten
The strings did not switch placesOnly one half knot was tied, or the second one went the other wayA forward or backward knot needs two half knots in the same direction
The working string ended on the wrong sideTwo same-direction half knots instead of a forward-backward or backward-forward knotChange direction for the second half knot
Gaps between knotsThe half knot was tightened before it reached the topSlide each loop all the way up first, then pull snug
The bracelet curlsKnots pulled very hardPull until you feel resistance, not harder, and keep the work taped or pinned flat
An Alpha row looks out of placeThe knot direction was not reversed on a row traveling leftCheck the row's direction on your Alpha chart before you start it

To undo a knot, loosen it with a needle or pin rather than your fingernails; the tiny loops are hard to pick out by hand, as Instructables' guide also suggests.

Quick answers

FAQ

What are the 4 basic friendship bracelet knots?

Forward, backward, forward-backward and backward-forward. Each is two half knots. See the comparison table.

What is the difference between a forward and backward knot?

Direction. In a forward knot, the left string ties onto the right string and moves right. In a backward knot, the right string ties onto the left string and moves left. Either way, the knot shows the tying string's color.

When do you use a forward-backward knot?

When the pattern shows an arrow that goes right and then turns back left. It keeps the working string on the left side, which is how a line of color turns around, such as at the point of a sideways V.

Why is my knot the wrong color?

Usually the holding string went slack and the knot slipped onto the working string. Keep the holding string straight while you tighten each half knot.

What knots are used in Alpha bracelets?

Forward knots on rows traveling right and backward knots on rows traveling left. In the two-color method, squares in the second color use the opposite knot, tied by the base string. See Alpha bracelets.

How tight should friendship bracelet knots be?

Snug but not strained. Slide each half knot to the top first, then pull until you feel resistance. Very tight knots make the bracelet curl.